Add Cards/Tags for Arming/Disarming

Add Cards/Tags for Arming/Disarming

After adding cards or tags to the wireless security control panel, you can swipe the card or tag to arm or disarm all the detectors added to specific partition(s) of the security control panel, as well as clear alarms.

  1. Enter the Settings page of the Axiom wireless security control panel.
    • On the device list page, if the page is displayed in list mode, swipe the device name to the left and then tap .

    • On the device list page, if the page is displayed in thumbnail mode, tap the device name or tap .
    • Tap at the Partition page.

  2. Tap Card/Tag Management > Add New Card/Tag.
  3. For Axiom Hybrid, select a keypad.

    For Axiom Hub, skip this step.

  4. Present the card to the device when hearing a voice prompt.
  5. Create a card/tag name.
    • The name should contain 1 to 32 characters.

    • For Axiom Hybrid, the card/tag readers is on the keypad, rather than on the security control panel.

  6. Select partition(s) to be linked to the card/tag.

    You can arm/disarm the selected partition(s) by the card/tag.

  7. Tap Finish.