Configure Security Control Panel

On the Settings page of the security control panel, you can view and edit the basic information such as device name. You can also do configurations such as device time settings, network settings, account permission settings, device language, etc.

1. On the device list page, tap the security control panel and then log in to the device (if required) to enter the Partition page.
2. Tap to enter the Settings page.
3. Set the parameters on the page such as time zone.

   Time Zone

   Set the time zone where the security control panel locates in.

   Note:

   You should have the permission to set the time zone.

   DST

   Enable or disable Daylight Saving Time.

   Note:

   You should have the permission to set DST.

   Siren Delay Time (Perimeter Alarm)

   The delay time to trigger the linked siren when a perimeter zone is triggered.

   Note:

   • For details about perimeter zone, see the user manual of the security control panel.

   • The valid duration is from 0 s to 600 s.

   Account Management

   You can view the user name and user type of the current security control panel account, change the device password, and set user permission.

   Note:

   We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

   User Permission

   The administrator (or owner) and installer (or setter) can authorize the permission to use the device for other types of users.

   Enable Arming Process

   After enabled, the security control panel will automatically detect its default(s) during the arming process. If default(s) are detected, you can continue or stop the arming process according to the actual situation.

   Device Version

   If new version is available, a red dot will be displayed. In this case, you can tap to upgrade the device version.

   Note:

   You should have the permission to upgrade device version.

   EN Certification

   If enabled, the security control panel will be compliant with EN 50131-1 standard (Grade 2). And all users of the security control panel should log in to the device by user name and device password before they can access the device.

   CAUTION:

   If disabled, the security control panel will NOT be compliant with EN 50131-1 standard. Please contact the after sales or our technical support for information about the risks that may be incurred in your country if you disable EN Certification.

   Note:

   • Only the installer( or setter) has the permission to set EN certification. For other types of users, the parameter will not be displayed on the Settings page.

   • The parameter is not available for Axiom Hybrid, which only has the EN certificated version.