Control Partitions

You can set arming mode and clearing alarm for partition of the security control panel via the Mobile Client. Partition, which is an independent control system of a security control panel, allows you to batch arm/disarm all zones in it. If the security control panel has two partitions, you have two independent systems for arming or disarming.

Note:

The Axiom wireless security control panel supports only one partition (or independent system) currently.

On the device list page, tap the security control panel and then log in to the device (if required) to enter the Partition page and then control the partition.

Note:

If the device list page is in list mode, the arming status icon is displayed as or . If in thumbnail mode, the arming status icon is displayed as or .

Away Arming: When all the people in the detection area leave, turn on the away arming mode to turn on all zones in the partition after the defined dwell time.
Stay Arming: When the people stays inside the detection area, turn on the stay arming mode to turn on all the perimeter burglary detection (such as perimeter detector, magnetic contacts, curtain detector in the balcony). At the meantime, the detectors inside the detection area are bypassed (such as PIR detectors). People can move inside the area and alarm will not be triggered.
Disarming: In disarming mode, all the zones in the partition will not trigger alarm, no matter alarm events happen or not.
Clear Alarm: In disarming mode, all the zones in the partition will not trigger alarm, no matter alarm events happen or not.